Home > Default > WRT350N- Firmware Upgrade Failed

WRT350N- Firmware Upgrade Failed

November 30Hits:0
when upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.
Please help what i need to do?
I already tried to boot in safe-mode to minimize programs running (firewall, etc), still showing Upgrade failed.
Message Edited by viva on 10-20-2007 06:56 AM
(Edited subject to keep threads from stretching.
Message Edited by JOHNDOE_06 on 10-20-2007 06:59 AM


Go to the control panel/network connections and right click on the local area connection.  Click properties and roll down to highlight Internet protocol TCP/IP.  Click the properties button and check "use the following IP address".  Fill in and tab through.  The subnet mask will fill itself out to
make the preferred DNS server (the router) and click okay.
If the computer succeeds in getting an IP address (verify this by opening a command window and typing "ipconfig" and seeing what it say under the local area connection), type ping in the same command window and see if the router responds.
If so, you can use the TFTP.exe utility from linksys, available from linksysinfo.org at
Run this program, point it at the router IP and show it the bin file you want to use.  Might be a good time to use the released firmware rather than a beta.  But that is your call.  You can get the latest firmware from the linksys page.
If you are unable to ping the router, try putting the ethernet cable in a different port.  Don't ask me why, but when my router bricked, it would only work on slot 4.  Found this out by accident, but I was able to fix the router when I did this.  If it does not work on any slot, you may be screwed.  Call linksys and ask for a RMA to get a replacement.  I would not tell them you bricked it with a beta firmware!

Read other 5 answers


Related Articles

  • WRT350N- Firmware Upgrade FailedNovember 30

    when upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion. Please help what i need to do? I already tried to boot in safe-mode to minimize programs running (firewall, etc), still showin

  • Firmware upgrade failed, printer now say i has firmware version 0. attention light lights upOctober 11

    Hey all I had a problem printing a pdf on my mac, and then tried to upgrade my mac driver and printer firmware. But the firmware upgrade failed for some unknown reason. And now the printer just have the ready and attentions lights on constantly. I ha

  • Creative Zen Microphoto - "Firmware upgrade failed&quOctober 11

    Hi, two days ago my Zen Microphoto started in "Recovery Mode". I had no means of getting out. I first selected "Clean Up" and rebooted, still "Recovery Mode". Then I downloaded the latest firmware version for it: ZENMicroPhot

  • Firmware upgrade failsNovember 30

    I am having trouble upgrading the firmware on my WRE54G. My hardware is v.3 and the existing firmware is 3.01.01. I downloaded the latest firmware and extracted the .img file. I went to the admin page of the expander, pointed it towards the new firmw

  • Vision:M - "Firmware upgrade failed!&quNovember 30

    After spending several long, long hours rolling back WMP, trying different USB ports, installing and uninstalling various software, and borrowing friends' computers, I FINALLY got the firmware upgrade software to recognize my mp3 player. With great d

  • WRK54G firmware upgrade fails: file pattern error.November 30

    When I attempt to upgrade the firmware in my WRK54G router, the upgrade fails with this error message: Upgrade action is not finish!! Upgrade file pattern error. The linksys download page says the file size is 1.10 MB. The size of the file I download

  • Spa508 firmware upgrade failedNovember 30

    I bought a spa500ds and need to upgrade the firmware on my 508G to use it. When I try to upgrade to 7.5.4, or 7.5.3 I get a failure.  I was able to upgrade to 7.5.1a fine.  All firmware was downloaded from cisco this morning and unziped I see my tftp

  • WRT350N firmware upgrade not workingNovember 30

    Hi, I've just been given an unused WRT350N router. I've had a few problems getting it setup on my MAC (OSX 10.5.6), but it transpired they were problems using Firefox which were resolved when I started using Safari. However, I still have one outstand

  • WRT54GS V.4 Firmware upgrade failed.November 30

    Hi, I need help on the unit on the firmware upgrade. Info: Device Model No.: WRT54GS v.4 Webpage firmware Version: v1.06.3 I had download the Version 4 firmware and upgrade fail. Please help!!!! ThanksAre you getting any specific error..? Which brows

  • SGE2010P 48port Gigabit POE Firmware Upgrade failsNovember 30

    I have a Linksys SGE2010P 48 Port switch with POE and I cannot get the firmware to upgrade. I have downloaded the firmware software from the site: http://www.cisco.com/en/US/products/ps9985/index.html Everytime I run the EasyUpgrade application I get

Copyright (C) 2019 wisumpire.com, All Rights Reserved. webmaster#wisumpire.com 14 q. 1.080 s.