Home > Default > USB-6009 with Labview 2014 on Windows 8.1

USB-6009 with Labview 2014 on Windows 8.1

October 11Hits:0
Advertisement
Hi,
I have trouble connecting USB-6009 OEM with my new laptop with windows 8.1. My USB-6009 OEM device is not shown up in NI Max. So when I check Device Manager, there is a question mark on "NI USB-6009 OEM FW". I tried to install Labview 2011 but still the same. When I tried to choose the driver in Device Manager manually, I can only find NI-VISA driver as the closest one. It is still not working when I open DAQmx to check my card. It is still not detected in NI Max and anywhere within labview. When I used NI-VISA driver, and try to connect the device in NI Max, I get timeout error. I think I need to see NI-USB driver instead of NI-VISA driver. Any help would be appreciated.
Cheers,

Answers

Hi Thoo,
You may also want to try reinstalling the DAQmx 14.5 driver first. DAQmx 14.5 is supported on Windows 8.1. Some of the driver files may have been corrupted and reinstalling the driver may solve the issue. If not, using the DAQmx Base driver could be a good option as Dennis suggested.
Thanks,
Frank
Application Engineer
National Instruments

Read other 8 answers

Tags:

Related Articles

  • USB-6009 with Labview 2014 on Windows 8.1October 11

    Hi, I have trouble connecting USB-6009 OEM with my new laptop with windows 8.1. My USB-6009 OEM device is not shown up in NI Max. So when I check Device Manager, there is a question mark on "NI USB-6009 OEM FW". I tried to install Labview 2011 b

  • Labview 2014 crashing(windows 7)November 30

    Hello for some reason my labview 2014 crashes when i try to open the labview application. It was working fine until yesterday but not having any luck today. Also i cannot see my labview software in the programs and feature section on the control pane

  • USB-6009 labview 7.1October 11

    Hi can anybody tell me if they have had any problems running USB-6009 with Labview version 7.0? I can't get it to recongnise my device and it's behaving as if there is nothing there. Do I need version 7.1 or is there a more sinister problem afoot? Ky

  • USB-6009 DAQOctober 11

    Hi; Would you please advise which NI-DAQ software version is for USB-6009 using LabVIEW 7.1? RegardsHi; I have downloaded NI DAQ MX 8.9 which is supports LabVIEW 7.1, but it can not detect the NI USB-6009 driver and still asking for the driver. Can a

  • Adquisicion de datos usb 6009November 30

    Que tal Mi duda es la siguiente, tengo la tarjeta usb 6009 y labview 8.0 estoy enviando un dato por pin Ao0 y recibo el dato por el pin Ai0 pero dato que recibo no es el mismo que envie, también me gustaria saber para que sirve la ranura interna que

  • USB-6009 Daqmx Base 3.3 Cannot creat 2 or more channels on Windows mobile 6October 11

    Hello, I have USB-6009, PDA iPAQ 214, WM6, Daqmx base 3.3, Labview 2009. In order to create new mobile project I use wizard and standart dynamic example: Cont Acq&Graph Voltage-Int Clk.vi. All works ok, but if I add more chanels in VI "Create Cha

  • USB 6009 - mysterious problemOctober 11

    Have mysterious problems with my new USB 6009. I'm using LabView 7 on MacOS-X 10.3.8. All vi's of DAQmx show "ERROR 15 - Ressource not found". Then I tested: - "lsdaq" shows the device - "nidatalogger" works - "mxbasecon

  • USB-6009 AI and AOOctober 11

    Hello, I have an USB-6009 DAQmx device. I would like to measure analogue input with the possible highest sampling rate (48kHz) . At the same time, I need to ramp a voltage analogue output from 0 to 5 Volts, lets say during 2 minutes. These two tasks

  • Opening & closing a solenoid valve using ni usb-6009October 11

    Hi, I am very new to labview so any help would be apprciated. I am using the ni usb-6009 as a power source for my solenoid valve. The valve is 12vdc but because the max output voltage for the ni usb-6009 is 5v i have designed and build an op-amp circ

  • Is it possible to install a usb-6009 in Dasylab?October 11

    I need to install a usb-6009 in Dasylab, but Dasylab does not recogise daqmx-devices, or so it seems. In MAX, I can see that I have traditional NI DAQ installed (7.4.2f3), but the usb devices are listed as daqmx devices. Is there any way to trick Das

Copyright (C) 2019 wisumpire.com, All Rights Reserved. webmaster#wisumpire.com 14 q. 0.551 s.