Home > Default > Traffic shaping G723 traffic between 2 companies

Traffic shaping G723 traffic between 2 companies

October 11Hits:0
Advertisement
Hi,
Can someone put me on the right way to implement traffic shaping (QoS) for G723 traffic.
Situation:
Two companies connected to each other with a vpn tunnel. The hardware is Cisco 2621xm at the sublocation and on the hq location is an 2651XM.
There is an GRE tunnel configured between the two sites. The GRE tunnel is up and working.
On both sites there is an telephony system that can use G723 anr/or G711. Both telephony systems are connected to each other.
Voice is working, but now we want to implement QoS for the VOIP connection.
Has someone suggestions for me ?

Answers

Hi,
Appy a policy-map with the desired QoS policy to the tunnel interface.
First of all, issue 'qos pre-classify' on the the tunnel itself, otherwise the congestion management mechanism will be useless.
Cheers,
Gabriel

Read other 2 answers

Tags:

Related Articles

  • Traffic shaping G723 traffic between 2 companiesOctober 11

    Hi, Can someone put me on the right way to implement traffic shaping (QoS) for G723 traffic. Situation: Two companies connected to each other with a vpn tunnel. The hardware is Cisco 2621xm at the sublocation and on the hq location is an 2651XM. Ther

  • Configuring QoS for FIOS Router MI-424WR: Traffic Priority and ShapingOctober 11

    Please only read on if you are an experienced internet user familiar with setting the advanced QoS and Firewall settings for the MI-424WR and make use of wireless adaptors from a PC to provide connectivity. This is my first post and my first week sin

  • Traffic Shaping - can't get it to workOctober 11

    Hi I'm attempting to create a basic traffic shaping policy in a lab environment but I can't seem to get it to limit the download rate? I can successfully achieve this with policing. I am testing the speed restriction using a broadband speed testing w

  • Can Anyone Help Me Configure My Verizon (D-Link) DSL-2750B "Traffic Shaping" (QoS)?October 11

    Well ... I just spent a wonderful hour and a half (not) bouncing around VZ technical support, etc. trying to get assistance regarding configuring my DSL router.* Between the low-quality Skype connection to India and my lack of success, I'm a little b

  • How do you tell if a 3750 interface is shaping or policing traffic?October 11

    We have an Avaya PBX Medpro board plugged into a 3750 port with the following configuration: interface FastEthernet1/0/4 description PBX Medpro-1 switchport access vlan 10 switchport mode access duplex full speed 100 srr-queue bandwidth share 10 10 6

  • Traffic Shaping for perticular trafficOctober 11

    class-map match-any SYSLOG-CMAP match access-group name SYSLOG-ACL policy-map SYSLOG-PMAP class SYSLOG-CMAP   shape average 250000 interface GigabitEthernet0/1 ip address 1.1.1.1 255.255.255.252 ip flow ingress load-interval 30 duplex full speed 100

  • Traffic shaping for the MacNovember 30

    Some routers offer a traffic shaping option to keep uploads from slowing down downloads on asynchronus connections. The Airport Express doesn't? Any software to do it on the Mac?No the AirPort Express (AX) does not have this feature. Any software to

  • Traffic Shaping ASR9k in output interface.November 30

    If we configure output traffic shaping  on an ASR 9000 interface the Service Policy is not installed, however in cco we can find that traffic shaping is supported see the next link: http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.2/

  • Per VLAN traffic shaping on ME3400November 30

    Customer side Metro 3400 switch: Port is 100Mb, Vlan 80 is 80MbCIR, Vlan81 is 10MbCIR want to shape each vlan down to CIR what is best configuration to do this? Here is what I tried... class-map match-all vlan81 match vlan 81 class-map match-all vlan

  • Traffic shaping/Application restriction questionNovember 30

    I have an XServe running 10.4.4. It's currently behind a router on a T1 and that services email (including web mail), file sharing, and FileMaker Pro sharing. I'd like to install a cable modem and attach it to the second ethernet port and use that ne

Copyright (C) 2019 wisumpire.com, All Rights Reserved. webmaster#wisumpire.com 14 q. 0.604 s.