Home >

spa525g2 register cucm 8.6

  • SPA525G2 To CUCM...November 30

    Hey guys, I've hooked up a SPA525G2 to our CUCM...  as a 3rd party SIP device.  It runs great.  with one extension hooked up to it. How do I add a second extension to the phone?  I setup EXT2 as I did with EXT1... I also setup EXT2 as I did with EXT1

  • Adding CUCM to TMSNovember 30

    I have added my CUCM 8.6.2 Cluster to TMS and appears to be all good. The problem is that when I check out the CUCM Managed Systems within TMS it reports an errror thatthe EX90 running TE601 Software is using the incorrect provisioning as it is regis

  • Third-party SIP Device (Basic) video callingNovember 30

    Hi, I want video calling with third-part SIP device to register CUCM 8.6. But my sip phones rejecting video calls. (there is no problem, audio calling...) I'm doing the same process with elastix ip pbx smoothly. Help me !!ip phone codec h264 , h263Re

  • RTMT ErrorNovember 30

    While trying to verify SAF learned routes and SAF forwarder information from RTMT I recieve an error "An Error Occurred While Processing Request" Does anyone help me to solve this issue?Dear Manish, I am facing another problem in Configuration.

  • CCD/SAF learned DNs are not able to callNovember 30

    Hi, I have configured SAF in CUCMEs and configured a SAF Forwarder for CUCM. All CUCMEs are learning and advertising DNs and able to call each other. SAF Forwarder registered CUCM as client and in CUCM I can see learned DNs too. CUCMEs are learning C

  • Call Manager v10.0November 30

    Hi all, My customer are using cisco telepresence system edge 95 MXP. They want to replace their existing call manager to the newest version of BE6000. Does cisco CM version 10 support the cisco telepresence 95 MXP ? Can anyone show me the reference d

  • Jabber Client on Samsung S3 mini (GT-I8190) cannot register on CUCM 9.1October 11

    We have a BE6000 running with CUCM 9.1 and Desktop Phones, Windows Jabber, iPhone Jabber and iPad Jabber are all working. Now i wanted to register a the Samsung S3 mini (GT-I8190) with Android 4.1.2 and get always the message "Connection failed."

  • CUCM 8.6.2 Phones not registering 7841 and 8831October 11

    Hi all I am trying to register some new phones - 7841 and 8831.  We installed the COP and Device Pack and rebooted the cluster.  Firmware defaults in the server are sip78xx.10-1-1SR2-1 and sip8831.9-3-3-5.  These are the first phones of these models

  • VG224 MGCP can´t register to CUCM 8.6.2-20000-2October 11

    I have tried to register cisco VG224 to CUCM 8.6 like MGCP gateway but it fail to register, any idea why this issue?Yes I have configure the FQDN of the gateway in CUCM. Debug logs Are: VGALP01(config)# *Mar  1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/mg

  • EX60 will not register to CUCM 8.6(2)October 11

    Hello,      I am trying to register a new EX60 to a CUCM 8.6(2) server, but the provisioning continually fails.  IP connectivity is verified, and both the server and endpoint configurations are correct based on this document:  http://www.cisco.com/c/

  • Can CUBE register with two CUCM clusters?October 11

    We have two CUCM clusters - one is in US and one is in Australia. Currently CUBE is registered with US Cluster with the settings below - sccp local GigabitEthernet0/0 sccp ccm identifier 2 priority 2 version 7.0 sccp ccm identif

  • Cisco Jabber for Mac 9.2.1: slow to register with CUCMOctober 11

    Hi, We have this specific problem on our Jabber for Mac 9.2.1 client only: the client takes 60 to 70 seconds to connect to CUCM (running 8.6.2) when it starts. After Jabber registers with CUCM, there is no issue, it's just very slow to register. Anyb

  • CUCM 8.6 - 8961 "Phone Not Registered"October 11

    Hi, I can't get my 8961 to register to my CUCM 8.6. My 7941 registered without a problem. I verified that I correctly entered the MAC Address. My 8961 can reach the TFTP server and get its TFTP file. Status Messages: 00:41:37 VPN Error :VPN is not co

  • What are the mandatory fields needed to setup/register the SIP phone manually in CUCMOctober 11

    What are the mandatory fields needed to setup/register the SIP phone manually.Also, if someone can let me know the mandatory fields for Cisco based SIP phone and also the third party SIP hard phones like Avaya or any other Third party SIP phones both

  • Recording Cisco phones registered on CUCM 8.6 with Verint Impact 360 not working.October 11

    Hello, We're trying to record audio from Cisco IP phones registered to a CUCM 8.6 using SPAN and Verint Impact 360 with no success. Verint provided us with some information to do the integration but we understand we don't need to do much on Cisco sid

  • Cisco 9971 Not Registering on CUCM 8.6October 11

    Hey, Ive run into some trouble with a 9971 phone running on CUCM 8.6. The phone has been registered with the server before with its settings locked down so the access to the settings menu via the phone has been disabled. Around a few weeks later the

  • How to register Endpoint from External to CUCMOctober 11

    We have Lab deployment: Cisco VCS-E Cisco VCS-C Cisco CUCM IM&P Cisco SX20 (Internal) Cisco EX90 (External) I have a problem: I registed successfull Cisco SX20 in Internal BUT EX 90 can't register to CUCM from External. How do i do?? Please, support

  • Cisco 9971 "not registered" after Reset on CUCM 9.1November 30

    Hello everyone, we are experiencing a strange problem with 9971 phones: We have two CUCM 9.1 clusters Our production-cluster: Publisher, 3 Subscribers, dedicated TFTP, Unity Connection, CUPS and our Lab environmant: Publisher, 1 Subscriber, TFTP on P

  • SIP phone DTMF issue registered on a CUCME H323 gatewayNovember 30

    I have a CUCME 10 gateway that is registered on a  callmanager as H.323 gateway. On this a Cisco 8831 SIP conference bridge that is not generating DTMF. No sound heard in the other end when pressing digits, its just muting the sound. Anyone got a tip

  • Registering Polycom / Third Party Codecs to CUCM 10.x as SIP DeviceNovember 30

    Hello, Has anyone tried registering Polycom or any Third party Codecs as SIP endpoints to CUCM 10.X. I would like to know of any feature limitations when such registered devices are in conference calls with external parties as well as to the Cisco co

Copyright (C) 2017 wisumpire.com, All Rights Reserved. webmaster#wisumpire.com 11 q. 0.174 s.