Home > Default > Only 5.5 Mbit with a Aironet 2600 AP

Only 5.5 Mbit with a Aironet 2600 AP

November 30Hits:0
Advertisement
Hi,
we have some (2) HP Notebooks with a Broadcon 4313 b/g/n WLAN Chip and use the latest drivers (2012). This Chip can provide up to 72 mbit/s with 2,4 ghz.
If we connect this notebooks to a Aironet 2600 AP (10 feet distance) the Windows 7 WLAN Dialog shows 72 Mbit/s for 3 seconds and than only 5.5 Mbit. Others (newer) Laptops show 450 Mbit. The WLAN works with WPA2/AES and PSK. The speed doesn't go up, if we copy a big file to the laptop.
Any Ideas?
Here is the Linktest from the AP to Client (from the WLC 2504 Webinterface):

Answers

The card in question is a 1x1:1 so at best will be the 72 or so. Based on your atachment it looks like its connecting only at g rates. I assume you have n enabled on the 2.4 network based on your responses.
Client will step down to lower rates when there is interference. But this seems odd that it would be only 5.5.
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

Read other 13 answers

Tags:

Related Articles

  • Only 5.5 Mbit with a Aironet 2600 APNovember 30

    Hi, we have some (2) HP Notebooks with a Broadcon 4313 b/g/n WLAN Chip and use the latest drivers (2012). This Chip can provide up to 72 mbit/s with 2,4 ghz. If we connect this notebooks to a Aironet 2600 AP (10 feet distance) the Windows 7 WLAN Dial

  • Cisco aironet 2600 series AP configuration with windows 2008 R2 Radius server.November 30

    I want to know the configuration of Cisco aironet 2600 series AP with windows 2008 R2 Radius server.   I have 1. AD & DHCP Server 2. Cisco Aironet 2600 Access Point. I want to connect wifi devices through this AP. Authentication should be through Rad

  • Question on Aironet 2600 AccesspointNovember 30

    Hello, I'm currently investigating on Aironet 2600 accesspoints. There are two model numbers, CAP2600 for controller based and SAP2600 for standalone/autonomous. My question now is, when I purchase a SAP2600 (=autonomous model), can I later convert i

  • Aironet 2600 max troughputNovember 30

    Hi, I was wondering about the maximimum bandwith thrue the AP 2600. A customer with a 100 Mbit fiber internet connection is complaining about getting only 20-25 Mbit troughput when wireless connected to internet. 80-100 Mbit using network cable. The

  • Aironet 2600 in standalone modeNovember 30

    hi, I have to set up the AP in a standalone mode to support voice and data traffic through the wireless network. for this, i was trying to look for the config guide so i know how to go about it, but all the doc was refering to controller based setup.

  • DHCP Error with WLC 2504 and Aironet 2600 setup across subnetsOctober 11

    Hey guys I have just setup a new WLC 2504 controller to manage a WiFi service that will span 6 geographic locations.  The local networks at each location are on different subnets (all 192.168.x.x) and are linked up via IPSEC VPN links, and there is A

  • Cisco Aironet 2600 not responding after changing static IP using web GUINovember 30

    Hey guys, I am hoping someone can point me in the right direction with this problem I am having. Over the weekend I changed the IP address of one of our remote Access points so that it would be in the correct VLAN for the building it is in. There are

  • Wifispot aironet AP 2600 seriesNovember 30

    Hello, I recently deployed a aironet 2600 AP series in one of our external office. My manager wants a wifispot there but without a password authentication. thats means it will be a open-wifispot but i find that too unsecured. Is there a way too let i

  • Trouble getting Cisco 2600 Series AP to stay joined to WLC 5508November 30

    Hi, I have recently been tasked with upgrading our old Autonomous APs to LWAPs.  We have a 5508 WLC at our Virtual Co-Lo and I am using Flexconnect to accomadate local switching and dhcp at our sites.  I have upgraded over 50 APs and joined them to t

  • QoS / Native VLAN Issue - Please HELP! :)October 11

    I've purchased 10 Cisco Aironet 2600 AP’s (AIR-SAP2602I-E-K9 standalone rather than controller based).  I’ve configured the WAP’s (or the first WAP I’m going to configure and then pull the configuration from and push to the others) with 2 SSID’s. One

Copyright (C) 2019 wisumpire.com, All Rights Reserved. webmaster#wisumpire.com 14 q. 1.035 s.