Home > Default > In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

October 11Hits:0
Advertisement
In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

Answers

I have checked with ISP, there response is like below:
Those are the NNI to GBNET IPs for Dominican Republic. They are Network IPs. You should be able to ping them-that means they are working.
WANRT01#show  ip route | include 192.168.20.20
B        192.168.20.200/30 [20/0] via 192.168.20.226, 02:18:29
B        192.168.20.204/30 [20/0] via 192.168.20.226, 02:18:29
Here its shows from any of our MPLS site we are able to trace the IP and it seems like, 192.168.20.204/30 is one more site but in actual its not.
INMUMWANRT01#ping 192.168.20.205
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.205, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 224/232/260 ms
INMUMWANRT01#trace              
INMUMWANRT01#traceroute 192.168.20.205
Type escape sequence to abort.
Tracing the route to 192.168.20.205
VRF info: (vrf in name/id, vrf out name/id)
  1 192.168.20.226 24 msec 24 msec 24 msec
  2 192.168.20.206 [AS 8035] 232 msec 232 msec 252 msec
  3 192.168.20.205 [AS 8035] 224 msec 224 msec *

Read other 6 answers

Tags:

Related Articles

  • In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.October 11

    In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.I have checked with ISP, there respo

  • MPLS Network for an EnterpriseNovember 30

    Hi, I am desiging an MPLS network for an enterprise customer. He would like to have both L2 and L3 VPNs (EoMPLS and VPLS). Initially I thought of positioning ASR1000 but later I ruled it out as it does not support VPLS. So it comes down to 7600. Then

  • Two separate enterprise WiFi networks in the same buildingOctober 11

    I work in a building that currently has Cisco controller based access points. The access points aren't managed by us and are actually part of another campus. We are given access to them but they don't work quite like we want them to. So we are wantin

  • Path Selection for Routes Across MPLS NetworkOctober 11

    Customer hub site has two CE routers with two links connected to two seperate PE routers in the Carrier's MPLS network. At the customer's remote site one CE router on a single link is connected to PE router in MPLS network. How can I configure the CE

  • L3 mpls network with out P router, all PE to PE plus daisy chaingingNovember 30

    Guys, is it possible to run a core l3 MPLS network over 7600s and 3800s with out any P routers? The reason i aak is because of the particular situation where we will have to daisy chain PE routers due to lack of fiber. any thoughts?As martin says abs

  • MPLS Network BackupNovember 30

    We have a MPLS network between Head office & varios branch office located across the globe. Can you suggest me the best possible backup(automatic) for this MPLS? as we are facing lot of breaks/cuts in the MPLS Network.This is to give a fair idea. Pls

  • OSPF downward bit in MPLS networkNovember 30

    Hi all, I have an issue with using the OSPF downward bit and hope someone has seen this before.  It appears to do nothing in this example to prevent routes being learnt via the wrong path.  That is via a backup router that has learnt the route from t

  • Routing to MPLS networkNovember 30

    Hi, We have several branch offices connected via a managed MPLS network. Each MPLS router in the branch office is connected to the local LAN switch, with its separate firewall and internet access router. How do we direct traffic from the local networ

  • Why CEF needed in MPLS Network??November 30

    I have read the MPLS Fundamentals book by Luc De Ghein, So I understand from the from book that cef needs to enabled in edge routers to tag or untag labels (for Ip packets). I am eager to know why Mpls (Not a cisco proprietary) depends on a cisco pro

  • What is Enterprise MPLSNovember 30

    Folks, Cisco has been pushing enterprise MPLS for a while. My question is that does it entail breaking the enterprise network into a core and edge. Just like SP and customer component in SP MPLS? Any advantage of moving towards enterprise MPLS? Thank

Copyright (C) 2019 wisumpire.com, All Rights Reserved. webmaster#wisumpire.com 14 q. 0.677 s.