Home > Default > Can the AEBS untag a VLAN (802.1q) on the WAN port?

Can the AEBS untag a VLAN (802.1q) on the WAN port?

November 30Hits:0
Advertisement
My modem (actually a fibre optical network terminal) provides a DHCP ethernet port. I would like to use my airport extreme for routing and wireless. Normally this would be a very simple setup, except the the modem requires all traffic to go over a specific VLAN (802.1q tagged). So, for this to work I would need the Airport to be able to untag/tag a specific VLAN on its WAN port. Is this possible?

Answers

I'll probably try to find the most minimal device that I can get to do transparent untagging of VLAN traffic. Not really sure where I might find that, but will start researching. I'd like to avoid using the current buggy router supplied by my ISP if at all possible!
I would suggest that you look at the various products provided by Cisco. FWIW I use a Cisco RVS4000 as my "main" router and have set up a number of VLANs for my home network with it.

Read other 4 answers

Tags:

Related Articles

  • Can the AEBS untag a VLAN (802.1q) on the WAN port?November 30

    My modem (actually a fibre optical network terminal) provides a DHCP ethernet port. I would like to use my airport extreme for routing and wireless. Normally this would be a very simple setup, except the the modem requires all traffic to go over a sp

  • Stacked VLAN (802.1Q-in-Q)November 30

    Hi, I would like to know if the Catalyst 6500 (Sup720-3b) supports the fonctionnality Stacked VLANs (802.1Q-in-Q) And if Yes, in witch IOS version. Thanks for your helpYes it does. As early as 12.1 supports this feature. Hope this helps. Please rate

  • AEBS 802-11N with fast ethernet ports?November 30

    Hi One year (januari 2007) ago I bought the new model of the AEBS 802-11N. I always thought it had 3 Gigabit Ethernet ports. Just now when trying to install the new 7.3.1 firmware, I only can install the Fast Ethernet firmware. It seems that the AEBS

  • What steps are needed to untag default vlan to gigabit port on SRW208PNovember 30

    We have VLAN 1 disabled on our standard Cisco Catalyst switches and use VLAN 11 as our default.  We have recently added VLAN 221 for voice while implementing a new Cisco UC system.  I can't seem to disable VLAN1, however, I have made the default VLAN

  • How many vlan can be created on single port of HWIC-2FEOctober 11

    Hi Guys, I have a router 1921 with a HWIC-2FE. How many VLAN can I create in each port of HWIC-2FE.   Thank you SalvoI'm not sure what you are referring to. How many VLANs can be untagged while the port is in access? Or how many VLANs can you pass on

  • VLANs and VoIP on the same portNovember 30

    Hello, we want to move our VoIP system on its own vlan. We currently have everything on one big broadcast domain. I have been doing some reading and have head about Voice Vlans and switchport modes. All of our computers are connected to our ip phones

  • WAN port inop and PM ethernet port inop - options to connect to AEBS?November 30

    Hi. We had a thunderestorm last week at home and we shut everything down and unplugged the power cords, but I think the cable to the cable modem fried some of my ports. I have a cable modem hooked to the WAN AEBS port and a cable from the LAN AEBS po

  • RV320 - vlan on Wan PortNovember 30

    Here in Brazil VIVO (from the spanish Telefonica group) is recently providing fiber links. Their fiber link is being splitted into 2 vlans: one for their IPTV (vlan id 20) and another for internet (vlan id 10). So, when they install on your house or

  • AEBS: use WAN port as a LAN port ?October 11

    Hello there, My Airport Extreme base station is connected to an Airport Express as a WDS wireless bridge (none of them distribute IP, there is a router on the network). I have two printers hooked on the AEBS, a USB one, and an Ethernet printer on the

  • Binding a VLAN to the WAN portNovember 30

    This is a Cisco SRP541W on the lasted firmware version. I need to bind VLAN 10 (tag it as VLAN 10?) to the WAN interface to authenticate with my ISP, can't seem to find this in the interface and fear that this router may not be able to do it at all.

Copyright (C) 2019 wisumpire.com, All Rights Reserved. webmaster#wisumpire.com 15 q. 0.930 s.