Home > Default > 802.1x dynamic vlan assignment based on MAC?

802.1x dynamic vlan assignment based on MAC?

November 30Hits:0
Advertisement
Hello,
I am using Catalyst3750 and Widows AD Authentication.
Our customers' pc is runnnig Windows (isn't 802.1x capable) that is connected to the catalyst switch.
Is it possible to dynamic assign a Vlan based on MAC?
When possible, we want to make it without using VMPS.
and, is there any document relating to the above.
Thanks a lot for you help.
Tomoyuki

Answers

Hello Tomoyuki,
which Radius Server are you using to authenticate your Clients?
For the Secure ACS you can configure a feature called "MAC-Authentication-Bypass" which fullfils your requirements.
This Feature must be configured on the Switch and on the Radius Server (which does the vlan assigment based on the MAC-Address of the Client)
An Overwiew of this feature can be found here:
http://www.cisco.com/univercd/cc/td/doc/solution/macauthb.pdf
I hope this helps,
Kind regards,
Chris

Read other 3 answers

Tags:

Related Articles

  • 802.1x dynamic vlan assignment based on MAC?November 30

    Hello, I am using Catalyst3750 and Widows AD Authentication. Our customers' pc is runnnig Windows (isn't 802.1x capable) that is connected to the catalyst switch. Is it possible to dynamic assign a Vlan based on MAC? When possible, we want to make it

  • 802.1x dynamic vlan assignment using ACS 4.2November 30

    Hi we have 10 switches 2960 configured with 802.1x authentication against ACS server 4.2. we have 2 vlans configured on the switches for administrator and endusers. the end user vlan id is 10 and the administartor vlan is is 100. we need to apply the

  • 802.1x Dynamic Vlan assignment using ACSNovember 30

    Hi, I have the following scenario 2 bulidings with multiple floor Each floor should be in different VLAN. The network should be authenticated with 802.1x and each switch port should be assigned with dynamic VLAN from ACS. Each user should be able to

  • 802.1x dynamic VLAN assignment with Radius NPS ServerNovember 30

    I can NOT get the NPS and Cisco 3550 switch to drop the authenticated user in a VLAN. I have followed this documentation, http://msdn.microsoft.com/en-us/library/dd314181(v=ws.10).aspx that basically says to use these Radius attributes, Tunnel-Medium

  • 802.1x dynamic vlan assignment with acs5.0November 30

    Hi All, Can any one guide me to configure 802.1x with acs 5.0. Its totally new look and m not able to find document related to 802.1x. ThanksHi All, Can any one guide me to configure 802.1x with acs 5.0. Its totally new look and m not able to find do

  • 802.1X for wired environments using Radius/ACS for Dynamic Vlan AssignmentNovember 30

    Currently Being Moderated 802.1X for wired environments  using Radius/ACS for Dynamic Vlan Assignment Could someone please provide me with a simplest set of configuration steps to fire up Radius in ACS and 802.1X for dynamic vlan assignment. The obje

  • 802.1x RADIUS with EAP-TLS/EAP-TTLS & Dynamic VLAN AssignmentNovember 30

    Hello, My team is looking for switches supporting 802.1x authentication on either EAP-TTLS or EAP-TLS protocols with dynamic vlan assignment enabled for these. Looking at the data sheets of the Linksys desktop switches, I found only SLM224G4PS and SL

  • 802.1x authetication with dynamic Vlan assignment by a radius serverNovember 30

    Hi At school I want to start using 802.1x authentication with dynamic Vlan assignment by a Windows Server 2012R2 Radius server. When a student logs in, I want it to be placed in the "Students" Vlan, when a Administrative employee logs in, I want

  • 871 802.1x with vlan assignment aka dynamic vlanNovember 30

    you can do vlan assignment on 871W wireless using the local radius server but unfort only LEAP which is N.G. I have been pounding on wired 802.1x PEAP (which works) trying to get vlan re-assignment. Have tried with IAS which I am using to do vlan rea

  • Dynamic VLAN Assignment with RADIUS Server and Aironet Access PointsNovember 30

    Hi Guys, I would like to go for "Dynamic VLAN Assignment with RADIUS Server and Aironet Access Points 1300". I want the AP to broadcast only 1 SSID. The client find the SSID ->put in his user credential->Raudius athentication->assign hi

Copyright (C) 2019 wisumpire.com, All Rights Reserved. webmaster#wisumpire.com 14 q. 0.648 s.